Behavior of tall masonry chimneys under wind loadings using CFD technique
نویسندگان
چکیده
منابع مشابه
Wind Actions and Responses of Steel Chimneys
Understanding some of the basic wind engineering concepts helps one understand the chimney’s response. The circular cross section of the steel chimney characteristically provides aerodynamic lift perpendicular to the wind direction. Knowing how to predict and prevent these adverse responses is of critical importance to steel chimney design. I. STATIC WIND FORCES The force exerted by wind varies...
متن کاملDeflection Measurement of Masonry Arch Bridges with Tall Piers: Case Study of Shahbazan Bridge
A common practice for detailed assessment of masonry bridges is to use recorded deflection signature of mid-span of such structures due to predefined loading schemes. However, measuring the deflection of bridges with tall piers or those situated over deep valleys introduces certain difficulties, since common deflection-meters require a reference point relative to which the measureme...
متن کاملWind Interference Effect on Tall Building
When a building is located in an urban area, it is exposed to a wind of different characteristics then wind over an open terrain. This is development of turbulent wake region behind an upstream building. The interaction with upstream building can produce significant changes in the response of the tall building. Here, in this paper, an attempt has been made to study wind induced interference eff...
متن کاملCFD in Wind Energy: The Virtual, Multiscale Wind Tunnel
Over the past two decades, computational fluid dynamics and particularly the finite volume method have been increasingly used to predict the performance of wind turbines within their environment. Increases in available computational power has led to the application of RANS-based models to more and more complex flow problems and permitted the use of LES-based models where previously not possible...
متن کاملExperimental Study on Axial Compression Behavior of RC Columns Under Rapid Loadings
In this study, experimental study on six RC columns with different slenderness ratios under axial rapid loading was conducted to investigate the axial compression behaviour of RC columns considering the effect of strain rates. The failure pattern of the specimens and the relations of axial loading versus the axial deformation were described. From the test results, the specimens under static and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Case Studies in Construction Materials
سال: 2020
ISSN: 2214-5095
DOI: 10.1016/j.cscm.2020.e00451