Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Yb3+-doped Silica WGM Milled Microrod laser

A fast and versatile fabrication method for high Q milled microrod resonators, directly on rare-earth doped fibers, is demonstrated using a pulsed CO2 laser. Evanescently pumped WGM microlaser with ~9μW output power has been achieved. OCIS codes: (140.3460) Lasers; (140.4780) Optical resonators; (060.2310) Fiber optics; (230.3990) Micro-optical devices

Analysis of Mechanically Milled Exchange Coupled Nanocomposite Permanent Magnets

Nanocomposite permanent magnets have recently evoked wide interest because of their interesting properties. They usually consist of a hard magnetic phase having superior coercivities and a soft magnetic phase having improved values of magnetization and when they are coupled together, we get a permanent magnet with enhanced values of both the parameters and thus can be put to a lot of applicatio...

Structural and magnetic properties of mechanically milled SmCo5:C

Coexistence of Ferromagnetic and Glassy States in Mechanically Milled GdAl2

Measurements of DC susceptibility, AC susceptibility, and AC susceptibility with an applied DC bias field were performed on mechanically milled GdAl2. A paramagnetic phase exists above a temperature T ≈ 140 K. However, there are significant deviations from the Curie-Weiss Law in this temperature regime, suggesting multiple magnetic components. Fits to the high temperature data show that two Cur...