Catadioptric freeform optical system design for LED off-axis road illumination applications
نویسندگان
چکیده
منابع مشابه
Freeform lens design for LED collimating illumination.
We present a simple freeform lens design method for an application to LED collimating illumination. The method is derived from a basic geometric-optics analysis and construction approach. By using this method, a highly collimating lens with LED chip size of 1.0 mm × 1.0 mm and optical simulation efficiency of 86.5% under a view angle of ± 5 deg is constructed. To verify the practical performanc...
متن کاملFreeform LED lens for uniform illumination.
Light flux from LED must be redistributed to meet the needs of lighting in most cases, a new method is proposed for its secondary optic design. Based on refractive equation and energy conservation, a set of first-order partial differential equations which represent the characters of LED source and desired illumination were presented. The freeform lens was constructed by solving these equations ...
متن کاملSecondary optical element design for intracorporeal LED illumination system.
In this Letter, we propose an intracorporeal illumination system for providing uniform and wide-field illumination during minimally invasive surgery. The illumination system is comprised of an Alexis wound retractor, a set of LEDs, and secondary optical elements (SOEs). The SOE was composed of a Fresnel lens and a total internal reflection lens, which was designed to improve the optical perform...
متن کاملOff-axis catadioptric fisheye wide field- of-view optical receiver for free space optical communications
We propose a wide field-of-view optical receiver design based on a fisheye lens and an off-axis catadioptric structure for free-space optical communications. The design utilizes a novel fisheye lens group to compress a wide field angle into a narrow field angle and produce the appropriately collimated light that can effectively be coupled into the following aperture of a catadioptric telescope....
متن کاملDesign, simulation, and quality evaluation of micro-optical freeform beam shapers at different illumination conditions.
A design method to generate thin micro-optical freeform (MOF) beam shapers by clipping or wrapping an original and much thicker freeform surface is provided. MOF elements are situated at the border between refractive and diffractive optical elements. The influence of parameters such as the clipping factor q, the peak-to-valley amplitude of the original surface, the design wavelength, and the sp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2017
ISSN: 1094-4087
DOI: 10.1364/oe.26.000a54