Catalytic Cracking of Waste Polypropylene in a Nitrogen Fluidized Bed Reactor
نویسندگان
چکیده
منابع مشابه
Polypropylene Production Optimization in Fluidized Bed Catalytic Reactor (FBCR): Statistical Modeling and Pilot Scale Experimental Validation
Propylene is one type of plastic that is widely used in our everyday life. This study focuses on the identification and justification of the optimum process parameters for polypropylene production in a novel pilot plant based fluidized bed reactor. This first-of-its-kind statistical modeling with experimental validation for the process parameters of polypropylene production was conducted by app...
متن کاملDecomposition of hydrogen peroxide in a catalytic fluidized-bed reactor
The decomposition of H2O2 by a novel supported g-FeOOH catalyst was performed in a continuous fluidized-bed reactor. This catalyst has been successfully used in the treatment of organic contaminants with H2O2 in our previous work. In this study, we attempted to determine the effects of pH, H2O2 concentration, and catalyst concentration on the decomposition of H2O2. An approach, we regarded this...
متن کاملControl of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملA Pilot Study of Syngas Production from Bio-oil Thermal Cracking in a Bubbling Fluidized Bed Reactor
A fluidized bed reactor that is operating in the bubbling regime has been developed for the conversion of bio-oils to syngas.The reactor consists of a 7.6 cm I.D. (or internal diameter) bed, with an expanded freeboard. The volume of the reactor can be adjusted to vary the gas residence time. This reactor has been used to carry out either thermal or catalytic cracking for reforming bio-oils.A ga...
متن کاملProcess simulation and sensitivity analysis of waste plastics gasification in a fluidized bed reactor
This paper presents a simplified process simulation model of typical waste polyethylene gasification in a fluidized bed reactor using Aspen Plus. The proposed model incorporates both physical and chemical processes, including drying, pyrolysis, combustion and gasification, by using various inbuilt modules to predict the resulting product gas composition and temperature. A detailed sensitivity a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Geoscience and Environment Protection
سال: 2016
ISSN: 2327-4336,2327-4344
DOI: 10.4236/gep.2016.44004