CFD for Subcooled Flow Boiling: Parametric Variations

Development of a Numerical Model for Subcooled Boiling Flow

Population balance equations combined with a threedimensional two-fluid model are employed to predict bubbly flows with the presence of heat and mass transfer processes. Subcooled boiling flow belongs to this specific category of bubbly flows is considered. The MUSIG (MUltiple-SIze-Group) model implemented in CFX4.4 is further developed to account for the wall nucleation and condensation in the...

Development of Two-phase Flow Cfd Code (eagle) with Interfacial Area Transport Equation for Analysis of Subcooled Boiling Flow

The interfacial area transport equation for a subcooled boiling flow is developed with a mechanistic model for the wall boiling source term. It includes the bubble lift-off diameter model and the lift-off frequency reduction factor model. Those models take into account a bubble’s sliding on the heated wall after a departure from the nucleate site and the coalescences of sliding bubbles. To impl...

Critical Heat Flux in Subcooled Flow Boiling of Water

Forced Convection Subcooled Boiling of Binary Mixtures

A mode based on an additive mechanism of heat transfer is proposed for forced convection subcooled boiling of binary mixtures. The contributing modes of heat transfer are: (i) the heat transferred as latent heat by the rising bubbles, (ii) the heat transferred as the heat contained in the superheated thermal layer that is removed from the surface in the wake of the rising bubbles and (iii) the ...

Critical heat flux for subcooled flow boiling in micro-channel heat sinks

Critical heat flux (CHF) was measured and examined with high-speed video for subcooled flow boiling in micro-channel heat sinks using HFE 7100 as working fluid. High subcooling was achieved by pre-cooling the working fluid using a secondary low-temperature refrigeration system. The high subcooling greatly reduced both bubble departure diameter and void fraction, and precluded flow pattern trans...