Challenges of Modeling Steam Cracking of Heavy Feedstocks
نویسندگان
چکیده
منابع مشابه
Molecular reconstruction of naphtha steam cracking feedstocks based on commercial indices
A new method for feedstock reconstruction of industrially important hydrocarbon fractions is developed using as input the analytically determined ommercial indices such as the average molecular weight, the specific density, theH/C-ratio, the paraffin, isoparaffin, olefins, naphthenes, aromatics PIONA) weight fractions and a set of ASTM boiling points. The method is based on Shannon’s entropy cr...
متن کاملScheduling of cracking production process with feedstocks and energy constraints
Abstract:This paper addresses the short-term scheduling problem for the ethylene cracking process with feedstocks and energy constraints. The cracking production of ethylene is a process with units that have decaying performance, requiring periodic cleanup to restore their performance. Under the condition of limited feedstocks, the production operating mode of the cracking furnaces is to keep y...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولCFD simulations of steam cracking furnaces using detailed combustion mechanisms
A three-dimensional mathematical model has been developed for the simulation of flow, temperature and concentration fields in the radiation section of industrial scale steam cracking units. The model takes into account turbulence–chemistry interactions through the Eddy Dissipation Concept (EDC) model and makes use of Detailed Reaction Kinetics (DRK), which allows the detailed investigation of t...
متن کاملWood-derived olefins by steam cracking of hydrodeoxygenated tall oils.
Tall oil fractions obtained from Norwegian spruce pulping were hydrodeoxygenated (HDO) at pilot scale using a commercial NiMo hydrotreating catalyst. Comprehensive two dimensional gas chromatography (GC×GC) showed that HDO of both tall oil fatty acids (TOFA) and distilled tall oil (DTO) produced highly paraffinic hydrocarbon liquids. The hydrotreated fractions also contained fatty acid methyl e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Oil & Gas Science and Technology - Revue de l'IFP
سال: 2008
ISSN: 1294-4475
DOI: 10.2516/ogst:2007084