Characteristics reproducibility of (Fe, Co)(Cr, Al) 2 O 4 pigments obtained by solution combustion synthesis
نویسندگان
چکیده
منابع مشابه
Processing of hydroxyapatite obtained by combustion synthesis
One of the reasons of implants failure are the stress forces appearing in the material–tissue interface due to the differences between their mechanical properties. For this reason, similar mechanical properties to the surrounding tissue are desirable. The synthesis of hydroxyapatite by solution combustion method and its processing have been studied in order to obtain fully dense ceramic bodies ...
متن کاملEVALUATION OF SOLUTION COMBUSTION METHOD IN THE SYNTHESIS OF Fe-ZrSiO4 BASED CORAL PIGMENT
Abstract: Auto-ignited gel combustion process has been used for producing a red hematite-zircon based pigment. The combustible mixtures contained the metal nitrates and citric acid as oxidizers and fuel, respectively. Sodium silicate (water glass) was used as silica source for producing zircon phase. X-Ray Diffractometery, Electron Microscopy and Simultaneous Thermal Analysis were used for ...
متن کاملPreparation of Nano Particle Mg 0 . 2 Fe 0 . 8 O by Solution Combustion Method and Their Characterization
The present paper investigated a preparation of Nano sized Mg0.2Fe0.8O by eco-friendly chemical combustion synthesis using magnesium and iron nitrates as oxidizers and the glycine as a fuel to drive the reaction. Powder characterization was carried out by X-ray diffraction (XRD) to estimate crystallite size, Particle Size Analyzer (PSA), Thermal gravimetric analyzer (TGA) for determining sample...
متن کاملMicrowave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics
Tungsten oxide (WO3) and tungsten oxide hydrate (WO3.H2O) nanoparticles were synthesized via microwave-assisted solution combustion in comparison with the acidic precipitation method. Oxalic acid was used as a surfactant and forming agent in the acidic precipitation method. In addition to oxalic acid, glycine and citric acid were also used as fuels in the microw...
متن کاملTernary System Al 2 O 3 – MgO – CaO : Part II , Phase Relationships in the Subsystem Al 2 O 3 – MgAl 2 O 4 – CaAl 4 O 7
Solid-state compatibility and melting relationships in the subsystem Al2O3–MgAl2O4–CaAl4O7 were studied by firing and quenching selected samples located in the isopletal section (CaOzMgO)–Al2O3. The samples then were examined using X-ray diffractomtery, optical microscopy, and scanning and transmission electron microscopies with wavelengthand energy-dispersive spectroscopies, respectively. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2016
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2016.05.054