Characterization of Titanium Diboride Composite Bipolar Plate for Polymer Electrolyte Membrane Fuel Cell
نویسندگان
چکیده
منابع مشابه
Optimization of Polymer Electrolyte Membrane Fuel Cell Performance by Geometrical Changes
Three-dimensional computational fluid dynamics in house-code of a Polymer Electrolyte Membrane Fuel Cell (PEMFC) has been developed. The conservation equations are numerically solved using finite volume technique. One of the important goals of this research is the investigation of the variation of bipolar plates width effect on the fuel cell performance compared with the conventional m...
متن کاملModeling and Simulation for Fuel Cell Polymer Electrolyte Membrane
We have established methods to evaluate key properties that are needed to commercialize polyelectrolyte membranes for fuel cell electric vehicles such as water diffusion, gas permeability, and mechanical strength. These methods are based on coarse-graining models. For calculating water diffusion and gas permeability through the membranes, the dissipative particle dynamics–Monte Carlo approach w...
متن کاملOptimization Model for Bio-inspired Design of Bipolar Plate Flow Fields for Polymer Electrolyte Membrane Fuel Cells
The flow field of a bipolar plate distributes hydrogen and oxygen for polymer electrolyte membrane (PEM) fuel cells and removes the produced water from the fuel cells. It greatly influences the performance of fuel cells, especially regarding reduction of mass transport loss. Flow fields with good reactant distribution capability reduce the mass transport loss, thus allowing higher power density...
متن کاملEffect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell
There are several obstacles to the commercialization of PEM fuel cells. One of the reasons is that the presence of carbon monoxide (CO) in the reformatted fuel, even at a very small scale, decreases the fuel cell performance. The aim of this paper is to investigate the effect of CO in reformatted fuel on PEM fuel cell performance. For this purpose, a steady state, one-dimensional and non-isoth...
متن کاملThe Stirred Tank Reactor Polymer Electrolyte Membrane Fuel Cell
The design and operation of a differential polymer electrolyte membrane (PEM) fuel cell is described. The fuel cell design is based on coupled stirred tank reactors (STRs) coupled through a membrane; the gas phase in each reactor compartment is well mixed. The characteristic times for reactant flow, gas phase diffusion, and reaction were chosen so that the gas compositions at both the anode and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society for Heat Treatment
سال: 2014
ISSN: 1225-1070
DOI: 10.12656/jksht.2014.27.4.169