Clarification of Austenite Grain Formation Behavior during Carburizing of Cold-worked High-chromium Carburizing Steel
نویسندگان
چکیده
منابع مشابه
Gas and Vacuum Carburizing
The solution algorithm used in CarbTool is based on the finite difference method (FDM), and the code is developed using Microsoft Visual C++ in Window OS. The tool has been built on the concept of the carbon flux at the surface between the gas and steel is to be specified by the user. The outputs of CarbTool are the carbon concentration distribution profile inside the steel part and the surfa...
متن کاملThermodynamic Simulation of Gas Carburizing of Steels
Simulation of metallurgical processes has been the subject of intense research due to the reduced number of experiments required for controlling the process as well as time and energy savings it allows. In gas carburizing of steel parts, the amount of carbon at the surface of carburized parts is the most important specification of the process in terms of achieving the desired metallurgica...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملKinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملEffect of Heat Treatment and Case Carburizing High-Density P/M Steels
Recent advancements in high-density lubricants enable P/M steels to be processed to densities approaching 7.40 g/cm in a single compaction step using heated compaction tools via the AncorMax D process. This broadens the number of suitable applications for P/M steels, including high performance gears. However, in addition to high-density, the microstructural and mechanical property requirements ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2009
ISSN: 1883-2954,0021-1575
DOI: 10.2355/tetsutohagane.95.169