Coil Temperature Rise and Workpiece Forming Efficiency of Electromagnetic Forming Based on Half-Wave Current Method
نویسندگان
چکیده
منابع مشابه
THEORETICAL AND EXPERIMENTAL EVALUATION OF DISLOCATION DENSITY IN A WORKPIECE AFTER FORMING
Abstract: The theoretical calculation of dislocation density in different regions of a deformed workpiece of 99.99% pure copper has been carried out using different procedures consisting of Finite Element Method (FEM) and hardness measurement. To assess the validity of the results pertaining to these procedures, the dislocation density is experimentally measured utilizing the Differential...
متن کاملSHEET ELECTROMAGNETIC FORMING USING CONVEX PUNCH INSTEAD OF CONVAVE DIE
High speed and absence of a precise control over pressure distribution confine sheet Electromagnetic Forming into a die to simple shapes having shallow depth. It is possible to reach a higher depth by using a convex punch instead of a concave die. In this study, sheet Electromagnetic Forming on a punch and sheet Electromagnetic Forming into a die are investigated. The electromagnetic part of th...
متن کاملExperimental Study of the Voltage and Number of the Coil Rounds in Electromagnetic Forming Process of the V shape Aluminum sheets
Electromagnetic power, which is one of the fast ways for forming, is used for forming workpieces without having any effect on them. Using it causes the workpieces to reach the minimum back spring and tear; consequently building the equipment like pistons will cost less than before. Electromagnetic power is used for forming Aluminium sheets into V shapes in this study. As the coils connect the m...
متن کاملSimulation Models of the Electromagnetic Forming Process
Suitable simulation approaches for the preliminary investigation of the electromagnetic metal forming process are presented. For this purpose an uncoupled (loose-coupled) simulation model is compared to a more rigorous sequential-coupled approach. As shown by examples, the connection between electromagnetic field and spatiotemporal evolution of the deformation of the workpiece cannot always be ...
متن کاملTransient Phenomena in Electromagnetic Forming Processes
The paper deals with finite element model for analysis of electromagnetic forming process of thin metallic sheets. The investigation starts with the FLUX simulation of transient electromagnetic field phenomena, continues with a transient structural analysis using ANSYS Structural under loads previously evaluated and ends with an ANSYS Multiphysics fully coupled analysis. The paper emphasizes th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2020
ISSN: 2169-3536
DOI: 10.1109/access.2020.2965254