Combined growth of α-Al and Bi in a Al-Bi-Cu monotectic alloy analyzed by in situ X-ray radiography
نویسندگان
چکیده
منابع مشابه
EVALUATION OFDISLOCATION STRUCTURE AND CRYSTALLITE SIZE IN WORN AL-SI ALLOY BY X-RAY DIFFRACTION
Abstract: powerful method for the characterization of microstructures of crystalline materials in terms of crystallite size anddislocation structures. In this paper the effect of the sliding on the microstructure of A356 in the as-cast and heattreated conditions are studied, The X-ray phase analysis shows that with increasing applied load, the dislocationdensity is increased, whereas the crysta...
متن کاملIn Situ and Real-Time Observation of the Solidification Process of Al20mass%Cu Alloy by Synchrotron X-ray Radiography
High brilliance synchrotron X-ray radiography has been used to in situ study the solidification process of Al20mass%Cu alloy with nominal spatial and temporal resolutions of 7.4 μm and 300ms, respectively. The block of favorably oriented dendrites by the unfavorably oriented ones was first observed in metal solidification, which related to solute interaction of neighbor dendrites. Solute inter...
متن کاملBi-concave Functions Defined by Al-Oboudi Differential Operator
The purpose of the present paper is to introduce a class $D_{Sigma ;delta }^{n}C_{0}(alpha )$ of bi-concave functions defined by Al-Oboudi differential operator. We find estimates on the Taylor-Maclaurin coefficients $leftvert a_{2}rightvert $ and $leftvert a_{3}rightvert$ for functions in this class. Several consequences of these results are also pointed out in the form of corollaries.
متن کاملEffect of the Bi content on the mechanical properties of a Sn-Zn-Al-Bi solder alloy
Because of environmental and health concerns, some alternative solder alloys, named lead-free ones, are being developed. Among them, the Sn-Zn-Al system has been studied and reveals promising properties. Selection of the solder alloys, for the electronic industry applications, is conditioned by their mechanical properties due to the stress produced in service. The studied alloys were produced b...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Crystal Growth
سال: 2020
ISSN: 0022-0248
DOI: 10.1016/j.jcrysgro.2020.125592