Compact SIDGS Filtering Power Divider With Three-Port 10-GHz Reflectionless Range
نویسندگان
چکیده
In this brief, a compact high isolation filtering power divider (FPD) with wide stopband and wide-band three-port reflectionless operation is proposed. Such FPD consists of trigonometric substrate-integrated defected ground structure (SIDGS) based resonator three absorptive networks. The good performance achieved by using the SIDGS. Meanwhile, networks on common-gate topology capable absorbing out-of-band reflected signals are connected to SIDGS resonator, which provides wideband in all ports FPD. To verify mechanisms mentioned above, operated at 2.10 GHz (i.e., $\boldsymbol {f_{0}}$ ) fabricated, exhibits 42 dB rejection level up 20 notation="LaTeX">$9.5\boldsymbol ). measured range return loss lower than −10 10 ports. core size about notation="LaTeX">$0.36\,\,\boldsymbol {\lambda _{g}} \times 0.38\,\,\boldsymbol _{g}}$ , where microstrip guided wavelength center frequency.
منابع مشابه
A compact ultra-wideband power divider with favorable selectivity using transversal filtering transformer
A compact ultra-wideband (UWB) power divider with favorable selectivity is proposed. A transversal filtering transformer consisting of two different centrally loaded resonators with common feeding lines is introduced at input port to obtain good in-band response and high out-of-band rejection. Simple and rapid design procedure is adopted to find the key parameters. A prototype power divider is ...
متن کاملA Compact, Planar, Eight-Port Waveguide Power Divider/Combiner: The Cross Potent Superhybrid
In this letter, we present a novel four-way divider/combiner in rectangular waveguide. The design is completely two-dimensional in the h-plane, with eight-fold mirror symmetry, and is based on a recent four-port hybrid design [6]. In combining mode, it can function as a phased array with four inputs and four outputs. The planar nature of this design provides advantages, such as the freedom to i...
متن کاملA 28-36 GHz Optimized CMOS Distributed Doherty Power Amplifier with A New Wideband Power Divider Structure
Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...
متن کاملSubstrate integrated waveguide power divider, circulator and coupler in [10-15] GHz band
The Substrate Integrated Waveguide (SIW) technology is an attractive approach for the design of high performance microwave and millimeter wave components, as it combines the advantages of planar technology, such as low fabrication costs, with the low loss inherent to the waveguide solution. In this study, a substrate integrated waveguide power divider, circulator and coupler are conceived and o...
متن کاملMicromachined 28-GHz Power Divider in CMOS Technology
A broad-band power divider is presented in CMOS technology. The devices are realized by postprocessing chips that are fabricated in a standard 1.2m CMOS process. Developed postprocessing includes wire bonding for ground equalization, deposition of a stress-compensation layer, and selective etching of the silicon substrate. By employing coupled coplanar transmission lines, the area of dividers i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Circuits and Systems Ii-express Briefs
سال: 2022
ISSN: ['1549-7747', '1558-3791']
DOI: https://doi.org/10.1109/tcsii.2022.3165848