Comparing Shear Bond Strength Of Auto-polymerized Soft Lining Materials to Acrylic Denture Base Using Different Surface Treatment and Denture Base Materials
نویسندگان
چکیده
منابع مشابه
Shear Bond Strength of Acrylic Denture Teeth to PMMA and Polyamide Denture Base Materials
Introduction: Detachment of denture teeth from denture base is one of the most common reasons for costly denture repairs .This study aimed at evaluating the bond strength of an acrylic denture tooth to polyamide injection-molded thermoplastic denture base material compared with three conventional polymethylmethacrylate (PMMA) denture base resins. Materials and Method: A total of 40 acrylic dent...
متن کاملShear bond strength of acrylic teeth to acrylic denture base after different surface conditioning methods.
BACKGROUND AND OBJECTIVES Acrylic resin ruled the dental profession for 60 years, and this success is attributed to its aesthetics, handling properties, physical and biological compatibility, its stability in oral environment and its cost effectiveness. The objective of this study is to evaluate and compare the bond strength of acrylic resin teeth treated with various conditioning materials lik...
متن کاملFactors affecting the bond strength of denture base and reline acrylic resins to base metal materials
OBJECTIVE The shear bond strengths of two hard chairside reline resin materials and an auto-polymerizing denture base resin material to cast Ti and a Co-Cr alloy treated using four conditioning methods were investigated. MATERIAL AND METHODS Disk specimens (diameter 10 mm and thickness 2.5 mm) were cast from pure Ti and Co-Cr alloy. The specimens were wet-ground to a final surface finish of 6...
متن کاملEffect of potentially chromogenic beverages on shear bond strength of acrylic denture teeth to heat-polymerized denture base resins
BACKGROUND Detachment of denture acrylic resin artificial teeth from denture base resin is one of the most common problems presented by denture wearers. PURPOSE This study investigated the shear bond strength (SBS) and fracture type of bonding interface of two commercial acrylic teeth (Vipi Dent Plus e Biolux) to two denture base resins (Vipi Cril e Lucitone 550) after immersion in potentiall...
متن کاملShear bond strength of two chemically different denture base polymers to reline materials.
PURPOSE This study evaluated the shear bond strengths of light-polymerized urethane dimethacrylate (Eclipse) and heat-polymerized polymethylmethacrylate (Meliodent) denture base polymers to intraoral and laboratory-processed reline materials. MATERIALS AND METHODS Thirty disks measuring 15 mm diameter and 2 mm thick were prepared for each denture base material following the manufacturers' rec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Iraqi Dental Journal
سال: 2016
ISSN: 2411-9741,2307-4779
DOI: 10.26477/idj.v38i1.66