Comprehensive Energy-Saving Technology for RTO Flue Gas Waste Heat Utilization
نویسندگان
چکیده
منابع مشابه
Energy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملUtilization of Dry Calcium Based Flue Gas Desulfurization Waste as a Hazardous Waste Fixation Agent
includes materials such as waste oil, solvents, and some boiler cleaning fluids which have a heating value. There is at least one boilcleaning product that has a positive heating value. During the boiler cleaning process, the fluid is collected in a temporary storage tank, after the cleaning process is completed it is reinjected into the boiler as essentially an additional heat input to the boi...
متن کاملEnergy-saving method for technogenic waste processing
Dumps of a mining-metallurgical complex of post-Soviet Republics have accumulated a huge amount of technogenic waste products. Out of them, Kazakhstan alone has preserved about 20 billion tons. In the field of technogenic waste treatment, there is still no technical solution that leads it to be a profitable process. Recent global trends prompted scientists to focus on developing energy-saving a...
متن کاملReaction Kinetics for a Novel Flue Gas Cleaning Technology
This paper studies the kinetics of the reaction between NaClO3, FeSO4, and NaHSO3, which can potentially be used as an alternative to the conventional lime-limestone process for flue gas desulfurization. The key for the establishment of a kinetic model of the reaction is to find a way to determine concentrations of reactants or products during the reaction. The generation rate of Clduring the r...
متن کاملIncreasing Cooling Towers Heat Capacity by Flue Gas Introduction
In this paper the changes in the heat capacity of cooling towers has been investigated as a result of injecting combustion products of boilers. In the tower, the air is re-heated through mixing with hot flue gas after passing through the heat exchangers. As a result of this process, the draft of the cooling tower is increased. The additional produced draft depends on the ambient temperature and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers Research of Architecture and Engineering
سال: 2021
ISSN: 2591-7595,2591-7587
DOI: 10.30564/frae.v4i1.2656