Constructing high-performance electrode materials using core–shell ZnCo2O4@PPy nanowires for hybrid batteries and water splitting
نویسندگان
چکیده
منابع مشابه
Electrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملRecent Progress on Spray Pyrolysis for High Performance Electrode Materials in Lithium and Sodium Rechargeable Batteries
Since the introduction to market by Sony in the early 1990s,[1] lithium-ion batteries (LIBs) have become dominate power sources for consumer electronics and have been recognized as a critical enabling technology to make electric vehicles (EVs)/ hybrid electric vehicles (HEVs) a success.[2] They are also being used to store carbon-free and renewable energy sources, such as solar, wind, and ocean...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملPerformance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries
The Li-excess oxide compound is one of the most promising positive electrode materials for next generation batteries exhibiting high capacities of 4300 mA h g 1 due to the unconventional participation of the oxygen anion redox in the charge compensation mechanism. However, its synthesis has been proven to be highly sensitive to varying conditions and parameters where nanoscale phase separation ...
متن کاملDevelopments in electrode materials and electrolytes for aluminiumeair batteries
Aluminiumeair cells are high-energy density (<400 W h kg 1) primary batteries developed in the 1960s. This review shows the influence of the materials, including: aluminium alloy, oxygen reduction catalyst and electrolyte type, in the battery performance. Two issues are considered: (a) the parasitic corrosion of aluminium at open-circuit potential and under discharge, due to the reduction of wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2020
ISSN: 2046-2069
DOI: 10.1039/d0ra05177b