Control weld geometric parameters when wet underwater welding
نویسندگان
چکیده
منابع مشابه
Sensitivity model for prediction of bead geometry in underwater wet flux cored arc welding
To investigate influence of welding parameters on weld bead geometry in underwater wet flux cored arc welding (FCAW), orthogonal experiments of underwater wet FCAW were conducted in the hyperbaric chamber at water depth from 0.2 m to 60 m and mathematical models were developed by multiple curvilinear regression method from the experimental data. Sensitivity analysis was then performed to predic...
متن کاملEffect of Mig Welding Input Process Parameters on Weld Bead Geometry on Hsla Steel
The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...
متن کاملNumerical simulation of the dynamic characteristics of weld pool geometry with step-changes of welding parameters
Abstract The gas tungsten arc welding process is an uncertain nonlinear multivariable system. In order to control the welding process, the nonlinear dynamic relationship between the weld pool geometry reflecting the weld quality and the welding parameters must be developed. A three-dimensional numerical model is developed to investigate the dynamic characteristics of the weld pool geometry when...
متن کاملDesign Parameters Selection and Optimization of Weld Zone Development in Resistance Spot Welding
This paper investigates the development of weld zone in Resistance Spot Welding (RSW) which focuses on weld nugget and Heat Affected Zone (HAZ). The effects of four factors namely weld current, weld time, electrode force and hold time were studied using a general 2 factorial design augmented by five centre points. The results of the analysis showed that all selected factors except hold time exh...
متن کاملInfluence of laser welding process parameters on weld pool geometry and duty cycle
In pulsed Nd:YAG laser welding process, the material melts and solidifies consecutively by a peak high power laser beam. The solidification time in this process is very less as compared to that of conventional welding process. The mode of welding process is governed by the process parameters like laser energy, pulse duration, pulse frequency, power and welding speed. This paper aimed at to exam...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Pidvodni tehnologii
سال: 2020
ISSN: 2415-8569,2415-8550
DOI: 10.32347/uwt2020.10.1401