Crack Monitoring of Operational Wind Turbine Foundations

Crack Monitoring of Operational Wind Turbine Foundations

The degradation of onshore, reinforced-concrete wind turbine foundations is usually assessed via above-ground inspections, or through lengthy excavation campaigns that suspend wind power generation. Foundation cracks can and do occur below ground level, and while sustained measurements of crack behaviour could be used to quantify the risk of water ingress and reinforcement corrosion, these crac...

Wireless Concrete Strength Monitoring of Wind Turbine Foundations

Wind turbine foundations are typically cast in place, leaving the concrete to mature under environmental conditions that vary in time and space. As a result, there is uncertainty around the concrete's initial performance, and this can encourage both costly over-design and inaccurate prognoses of structural health. Here, we demonstrate the field application of a dense, wireless thermocouple netw...

Structural integrity monitoring of onshore wind turbine concrete foundations

Soil–structure reliability of offshore wind turbine monopile foundations

An overview of offshore wind turbine (OWT) foundations is presented, focusing primarily on the monopile foundation. The uncertainty in offshore soil conditions as well as random wind and wave loading is currently treated with a deterministic design procedure, though some standards allow engineers to use a probability-based approach. Laterally loaded monopile foundations are typically designed u...

Operational Modal Analysis of Wind Turbine Speed- increase Gearbox

Speed increase transmission gear box is the primary vibration and noise source of wind turbine, Operational modal method was adopted to collect impact data and response data of each point based on the gearbox test model. ANSYS finite element model is established to simulate the wind turbine gearbox. Then the modal frequencies of the two methods were compared to ensure the test model is correct....