Crack path stability in brittle fracture under pure mode I loading
نویسندگان
چکیده
منابع مشابه
Dynamic fracture initiation in brittle materials under combined mode I/II loading
A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...
متن کاملFinite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملinvestigation of fracture in v-notched brittle polymers under pure shear loading
sudden fracture is one of the major failure modes in brittle materials. plexiglass (polymethyl methacrylate) is a well known brittle polymer, widely used in various industries. many types of notches, particularly v-shaped notches, are sometimes used in the components made of plexiglass. these notches can dramatically decrease the load bearing capacity of components due to the concentration of s...
متن کاملCrack Growth during Brittle Fracture
Title: Crack Growth During Brittle Fracture in Compression. Author: Bartlett W. Paulding, Jr. Submitted to the Department of Geology and Geophysics February 9, 1965 in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology. Photoelastic analysis of several two-crack arrays predicts that compressive fracture is initiated at cra...
متن کاملCrack path prediction in anisotropic brittle materials.
A force balance condition to predict quasistatic crack paths in anisotropic brittle materials is derived from an analysis of diffuse interface continuum models that describe both short-scale failure and macroscopic linear elasticity. The path is uniquely determined by the directional anisotropy of the fracture energy, independent of details of the failure process. The derivation exploits the gr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Structural Integrity
سال: 2018
ISSN: 2452-3216
DOI: 10.1016/j.prostr.2018.12.122