Crystallographic character of grain boundaries resistant to hydrogen-assisted fracture in Ni-base alloy 725
نویسندگان
چکیده
منابع مشابه
SEGREGATION AT SPECIAL GRAIN BOUNDARIES IN Fe-Si ALLOY BICRYSTALS
The segre ation of silicon to the C=3, 112) and C=S, (013) symmetrical grain boundaries 1 was studied in well-fefined bicrystals of an Fe-l .9 at%Si alloy annealed in the range 773 1173 K using Auger electron spectroscopy. The segregation enthal y, AI1 = -8.1 * 0.5 kJ/mol, and entropy, AS = -69 r 0.4 i/(mol K), were determined for the (013f grain boundary in the temperature range 973 1173 K. Fo...
متن کاملOn APFIM of Grain Boundaries in a Nickel Base Superalloy
Experimental details of atom probe field ion microscopy (APFIM) of a Ni-16Cr-9Fe alloy are presented. In particular, studies concerning analysis of intergranular carbides and borides and segregation to grain boundaries are described. It was found that NiZ3B6 precipitates are very sensitive to preferential field evaporation, which necessitates optimization of the analysis conditions. In the FIM ...
متن کاملHydrogen embrittlement of grain boundaries in nickel: an atomistic study
The chemomechanical degradation of metals by hydrogen is widely observed, but not clearly understood at the atomic scale. Here we report an atomistic study of hydrogen embrittlement of grain boundaries in nickel. All the possible interstitial hydrogen sites at a given grain boundary are identified by a powerful geometrical approach of division of grain boundary via polyhedral packing units of a...
متن کاملGrain boundary character evolution during grain growth in a Zr alloy
Grain boundary character in samples of Zr701 annealed at two different temperatures has been investigated in terms of lattice misorientation. The main difference between the two samples was the extent of grain growth post-recrystallization. The textures were typical for the material. Differences between the texture-based misorientation distribution function (T-MDF) and the microstructure-based ...
متن کاملGeometric and Crystallographic Characterization of WC Surfaces and Grain Boundaries in WC-Co Composites
Electron backscattered diffraction has been used to determine the orientation of WC crystals in a WC-Co composite and atomic force microscopy has been used to measure the shapes of planar sections of the same crystals. A stereological analysis has been used to determine that { } 1010 prism facets and the {0001} basal planes are the WC surfaces that are most frequently in contact with Co. Furthe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2018
ISSN: 2041-1723
DOI: 10.1038/s41467-018-05549-y