Deformation and reverse snapping of a circular shallow shell under uniform edge tension
نویسندگان
چکیده
منابع مشابه
Numerical Investigation of Circular Plates Deformation under Air Blast Wave
In the current research the maximum deflection of circular plates made of AA5010 and AA1100 alloys under blast load was investigated. Shock waves were produced by exploding a spherical charge in different distances from the center of plates. The ABAQUS software uses conwep equation for blast loading analysis. It was found the results of these simulations have about 30% to 40% inaccuracy in comp...
متن کاملMetamaterials: Snapping Mechanical Metamaterials under Tension (Adv. Mater. 39/2015).
By exploiting snap-through instabilities, D. Pasini and co-workers design a damage-tolerant mechanical metamaterial that snaps sequentially under tension, thereby accommodating a very large deformation up to 150%. On page 5931, they describe how the nonlinear mechanical response of the metamaterial can be robustly programmed by tuning the architecture of its unit cell.
متن کاملBuckling Analysis of Polar Orthotropic Circular and Annular Plates of Uniform and Linearly Varying Thickness with Different Edge Conditions
This paper investigates symmetrical buckling of orthotropic circular and annular plates of continuous variable thickness. Uniform compression loading is applied at the plate outer boundary. Thickness varies linearly along radial direction. Inner edge is free, while outer edge has different boundary conditions: clamped, simply and elastically restraint against rotation. The optimized Ritz method...
متن کاملA boundary element analysis of crack-propagation mechanism of micro-cracks in rock-like specimens under a uniform normal tension
In this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. The oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. The present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. The ...
متن کاملComposite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2006
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2006.03.029