Design and analysis of concrete-filled tubular flange girders under combined loading
نویسندگان
چکیده
منابع مشابه
Concrete Filled Tubular Bracing Subjected to Cyclic Loading
The energy absorption of concrete filled, hollow-steel bracing was analyzed respect to geometric and mechanical parameters including the width-to-thickness section ratio, slenderness level, and strength of the steel and concrete. Local buckling and ductility were also investigated with respect to variation in the cross-section. The infill increased the compression resistance, even after multipl...
متن کاملAnalysis of Concrete Bridge Girders Strengthened with Cfrp Laminates under Service and Extreme Loading Conditions
Externally bonded carbon fiber reinforced polymer (CFRP) laminates are a feasible and economical alternative to traditional methods for strengthening and stiffening deficient reinforced concrete and prestressed concrete girders as shown in Fig. (1). Although extensive research has already been undertaken to investigate the behavior of CFRP strengthened bridge girders, the majority of work condu...
متن کاملAnalysis of Concrete Bridge Girders Strengthened with Frp Laminates under Service and Extreme Loading Conditions
The project is a continuation from fiscal year 2004-2005. Previous work aimed at developing new analytical tools for analysis of RC beams strengthened with FRP laminates. The models were used to analyze several test specimens of RC beams and to investigate the corresponding failure mode, and whether it is due to CFRP fracture, debonding, or concrete crushing. Current work focused on using the e...
متن کاملConcrete-Filled-Large Deformable FRP Tubular Columns under Axial Compressive Loading
The behavior of concrete-filled fiber tubes (CFFT) polymers under axial compressive loading was investigated. Unlike the traditional fiber reinforced polymers (FRP) such as carbon, glass, aramid, etc., the FRP tubes in this study were designed using large rupture strains FRP which are made of recycled materials such as plastic bottles; hence, large rupture strain (LRS) FRP composites are enviro...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Structural Engineering
سال: 2021
ISSN: 1369-4332,2048-4011
DOI: 10.1177/13694332211001520