Design and simulation of divided wall column: Experimental validation and sensitivity analysis
نویسندگان
چکیده
منابع مشابه
Design and Analysis of Divided Wall Column
In this study, an efficient design method has been proposed for determining the optimal design structure of the dividing wall column. Preliminary design parameters are fixed on the basis of well-known shortcut method (Fenske-Underwood-Gilliland). The rigorous optimization is used to obtain the optimal design parameters of the divided wall column. Divided wall column has total eight design varia...
متن کاملModeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification
The distillation process remains as the most common method ofseparation in chemical process industries. The energy used from this process accounts for an estimated 3% of <span style="font-size: 10pt; c...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولReactive Distillation Process Analysis in a Divided Wall Column
This contribution aims to present a methodology to model and simulate the reactive dividing wall column (RDWC) using commercial software. Feasibility of separation scheme was established with ASPEN DISTILTM. Simulation of flowsheet configuration was performed with ASPEN HYSYSTM, using the two columns model. The reactive zone hosted by the prefractionator was modelled and simulated as backward f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Engineering and Processing: Process Intensification
سال: 2016
ISSN: 0255-2701
DOI: 10.1016/j.cep.2016.02.012