Design Optimization of Flexure Springs for Free-Piston Stirling Engines and Experimental Evaluations with Fatigue Testing

نویسندگان

چکیده

The free-piston Stirling engine is a closed-cycle regenerative heat that converts energy into mechanical work, and requires spring element for vibratory operations of the displacer power pistons. In this study, geometry flexural design was optimized through structural finite analyses fatigue test evaluations. First, we constructed target space considering required natural frequency assembly under geometric constraints total mass module height. experiments employed to construct simulation cases factors such as outer diameter, thickness, number spirals in sheet. As result, values were obtained satisfy requirements. We also fabricated specimen conducted tests using linear actuator system developed have same motion engine. results indicated spiral had no fracture operating conditions with piston amplitude, revealing effectiveness method.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamic Modeling of a Regenerator for the Control-Based Design of Free-Piston Stirling Engines

This paper describes a new approach to modeling and designing free-piston Stirling engines with the goal of building a working prototype. The Stirling cycle is recast as a dynamic system where control design tools and techniques can be applied to determine optimal manufacturable parameters for the engine. A simplified state-space analysis exhibits the merits of this perspective by revealing a l...

متن کامل

A Lumped-parameter Dynamic Model of a Thermal Regenerator for Free-piston Stirling Engines

This paper uses lumped parameter dynamic equations to model the mass flow, piston dynamics, and control volume behavior inside a free-piston Stirling engine. A new model for a Stirling engine thermal regenerator that incorporates a dynamically changing temperature gradient is presented. The use of graphite as a regenerator matrix material is justified despite its limited background by comparing...

متن کامل

Design analysis methods for Stirling engines

Journal of Energy in Southern Africa • Vol 19 No 3 • August 2008 Abstract Worldwide attempts are being made to increase the use of our renewable energy sources as well as to use our current fossil fuel energy sources more efficiently. Waste heat recovery forms a substantial part of the latter and is the focus of this project. Stirling technology finds application in both the renewable energy se...

متن کامل

Linear Alternator Technologies Used for Free Piston Stirling

Introduction: The NASA Glenn Research Center (GRC) is conducting in-house research on linear alternators (LA’s) to assist in developing free-piston Stirling convertors for radioisotope space power systems. This abstract intends to summarize the existing and potential types of LA’s that may be used with Stirling power convertors. Many of the existing LA types have been tested at NASA GRC and wor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energies

سال: 2021

ISSN: ['1996-1073']

DOI: https://doi.org/10.3390/en14165156