Determination of halogens by low-pressure helium ICP-MS.
نویسندگان
چکیده
منابع مشابه
Determination of traces of phosphorus in steels by laser ablation/ low-pressure helium-ICP-MS.
coupled plasma–mass spectrometry (ICP-MS) offers a powerful and rapid analytical method for different solid samples (e.g., rocks,1–3 metals,2,3 and ceramics3), the mass spectral interference often becomes a serious problem.4 For example, the determination of phosphorus (31P, monoisotopic element) is disturbed by 14N16OH+ and an adjacent large background peak of O2, which mainly originates from ...
متن کاملSimultaneous determination of trace elements in minute samples by electrothermal-vaporization/low-pressure helium-ICP-MS.
Electrothermal vaporization with two filaments was studied for low-pressure helium-ICP-MS. A 10-microl volume of sample was dried and vaporized, and then introduced to the ICP. With this technique, four elements were simultaneously determined with the acceptable precisions (RSD ca. 10%). The detection limit based on 3sigma of background signals approached the fractional ppb range. The proposed ...
متن کاملElectrothermal vaporization on a tungsten filament for the determination of arsenic in chloride solutions by low-pressure helium ICP-MS.
A combined method of electrothermal vaporization and low-pressure helium ICP-MS was developed for the determination of traces of arsenic in chloride solutions, because serious spectral interference occurred in conventional argon ICP-MS. On a tungsten filament was placed 5 microl of a sample and heated electrothermally to remove the solvent. The resulting residue on the filament was covered with...
متن کاملLaser ablation and low-pressure helium-ICP-MS for the analysis of alumina powder dispersed in glycerol.
A combined method of laser ablation (LA) and ICP-MS has gained much attention as a direct analytical method for solid samples. The determination of some elements, however, is seriously disturbed by isobaric interferences, mainly caused by argon and ambient air constituents. The use of low-pressure helium-ICP is a promising solution of the problem. A 1:1 mixture of alumina powder and glycerol wa...
متن کاملDetermination of Actinide Elements in Environmental Samples by Icp-ms
DETERMINATION OF ACTINDE ELEMENTS iN ENVIRONMENTAL SAMPLES BY ICP-MS Jason Bedford Truscott Methods for the determination of the actinide elements m water, biological, soil and sediment samples have been developed usmg on-line sohd phase extraction and high performance liquid chromatography (I{PLC) coupled with mductively coupled plasma mass spectrometry (ICP-MS) Initial applications utilised a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BUNSEKI KAGAKU
سال: 2003
ISSN: 0525-1931
DOI: 10.2116/bunsekikagaku.52.275