Development of Anode-Supported SOFC for Reduced-Temperature Operation
نویسندگان
چکیده
منابع مشابه
Anode-Supported Solid Oxide Fuel Cells with Thin Film Electrolyte for Operation at Reduced Temperatures
In order to reduce the operating temperature of solid oxide fuel cells (SOFCs), anodesupported cells incorporating thin film (~10 μm) electrolytes in conjunction with anode/electrolyte and cathode/electrolyte interlayers were studied. Anode supported button cells were prepared through a conventional approach and were analyzed via Scanning Electron Microscopy (SEM), Polarization, and Electrochem...
متن کاملDevelopment of plasma sprayed molybdenum carbide-based anode layers with various metal oxides for SOFC
Air plasma sprayed (APS) coatings provide an ability to deposit a range of novel fuel cell materials at competitive costs. This work develops three separate types of composite anodes (Mo-Mo2C/Al2O3, Mo-Mo2C/ZrO2, Mo-Mo2C/TiO2) using a combination of APS process parameters on Hastelloy ® X for application in intermediate temperature proton conducting solid oxide fuel cells. Commercially availabl...
متن کاملThe Numerical analysis of an anode-supported high temperature DIR-PSOFC operating conditions with considering the maximum allowable temperature difference
In the present study, the operating conditions of an anode-supported high temperature direct internal reforming (DIR) planar solid oxide fuel cell (SOFC) are numerically analyzed. SOFCs are the energy conversion devices that produce electricity and heat directly from a gaseous fuel by the electrochemical combination of that fuel with an oxidant. A planar SOFC consists of an interconnect structu...
متن کاملOperation of Ni-YSZ Anode Supported Solid Oxide Fuel Cell on Different Simulated Syngases
Ni-YSZ anode supported solid oxide fuel cells (ASCs) were tested under various simulated syngas. There was no voltage degradation of the cell operated on 41%H2-7%CH4-6%CO-11%CO2-35%H2O fuel condition for nearly 450 hours. However, the high vapor content reduced the open circuit voltage (OCV) and discharge voltage. The cells run steadily with most dry syngas until the simulated reforming tempera...
متن کاملStructural and defect chemistry guidelines for Sr(V,Nb)O3-based SOFC anode materials.
Structural and defect chemistry guidelines were used for Nb-substituted SrVO3-δ materials, designed to meet SOFC anode requirements, with emphasis on redox tolerance, thermochemical compatibility with other SOFC materials, electrical conductivity and adjustable changes in oxygen stoichiometry for their prospective impact on electrocatalytic performance. SrV1-xNbxO3-δ (x = 0-0.30) ceramics were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2001
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200116.0131pv