Development of Flame Propagation Model Considering Lewis Number Effect for Rich Fuel Mixture for Gasoline SI Engines
نویسندگان
چکیده
منابع مشابه
An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number
In this investigation, the structure of one-dimensional flame propagation in uniform cloud of volatile organic particles has been analyzed in which the structure of flame is divided into three zones. The first zone is preheat zone which is divided into three subzones itself. In first subzone (heating), particle cloud heated until the moisty particles reach to vapor vaporization temperature. In ...
متن کاملDevelopment of a Flame Propagation Model for Dual-Fuel Partially Premixed Compression Ignition Engines
A new combustion model is developed and applied to simulate combustion in dual-fuel engines in which the premixed natural gas is ignited by the combustion flame initiated by a diesel spray. The model consists of a diesel auto-ignition model and a flame propagation model. A G-equation model previously developed to simulate SI engine combustion was incorporated with an auto-ignition model to simu...
متن کاملA Transport Equation Residual Model Incorporating a Damkohler Criterion for Predicting the Flame Propagation in Gasoline Direct Injection Engines
A transport equation residual model incorporating a Damkohler criterion has been developed and implemented in the ERC KIVA-3V code for Gasoline Direct Injection (GDI) engine simulations for better predictions of flame propagation. In the transport equation residual model a fictitious species concept is introduced to account for the residual gases in the cylinder, which have a great effect on th...
متن کاملModel-based Feedback Control for an Automated Transfer out of Si Operation during Si to Hcci Transitions in Gasoline Engines
This paper takes a first step towards model-based feedback control for the transition between spark ignition (SI) and homogeneous charge compression ignition (HCCI) combustion modes by approaching the transfer out of SI operation during the SI into HCCI transition in a closed-loop control framework. The combustion mode switch is taken to be directly from SI to HCCI without an intermediate combu...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 2011
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.77.2210