Development of Polyamide 6/Compound by Recycled Rubber Blends Using Graphitized Polyethylene or Polypropylene with Maleic Anhydride as Compatibilizer Agent
نویسندگان
چکیده
منابع مشابه
Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation
Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation ...
متن کاملOxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...
متن کاملoxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
in this research, high oxygen-barrier films were organized based on low-density polyethylene (ldpe)/ ethylene vinyl alcohol (evoh)/ polyethylene-grafted maleic anhydride (ldpe-g-ma) compatibilizer. the effects of 10–30 wt. % evoh and 0–10 wt. % ldpe-g-ma loadings on the properties of final films were evaluated. the morphology of specimens was observed by using scanning electron microscopy (sem)...
متن کاملPolyamide-rubber blends: microscopic studies of the deformation zone
The morphology of injection moulded samples of polyamide-polybutadiene blends (85.15) with an average particle size of 0.3 pm was studied. The samples were fractured in a notched tensile test at crosshead speeds of 10m4 and 1 rns-’ and the structure of the deformation zone was studied using various techniques: polarized light microscopy, scanning electron microscopy, transmission electron micro...
متن کاملDetermination of percent polyethylene in polyethylene/polypropylene blends using cast film FTIR techniques
Polyethylene (PE) is the most common group of thermoplastic polymers due to its low cost and versatile physical properties. PE is blended with polypropylene (PP) to improve physical properties, such as low temperature impact performance. The composition of these blends is important with regard to performance, and the correct mixing of the pure homopolymers (PE and PP) can eliminate the need for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Aerospace Technology and Management
سال: 2013
ISSN: 2175-9146
DOI: 10.5028/jatm.v5i1.164