Development of Three-Dimensional Strip Profile Model for Thin-Foil Cold Rolling

Strip/Foil Rolling Mill Stochastic Excitation Model and Its Stability

Based on the stochastic rolling force data from aluminum hot strip tandem mill, the ARMA time series model and the stochastic excitation power spectral density (PSD) model are established, and the stochastic rolling forces excitation model is established by utilizing Levenberg-Marquardt combined with generalized global planning algorithm. A two dimensional stochastic nonlinear dynamical model o...

Modeling of thin strip profile during cold rolling on roll crossing and shifting mill

Strip profile control in cold rolling of thin strip is a difficult and challenge problem found in industry. Currently using the novel type of strip rolling mill, such as the work roll crossing and shifting is the one of the main methods to control the strip profile quality in cold rolling. In this paper, 3-D finite element simulation models of the thin strip profile in cold rolling for the work...

a new rolling pressure model for an actual reversing cold rolling strip mill

the forging model for cold rolling is one of rolling models that is used in rolling calculations. in this model,the final rolling pressure is an average value and it is not an accurate model.also by using this model,the firction hill curves are plotted due to the central point of the rolling bite length while frictional stresses intersect at the neutral point.in this study, a new model based on...

Development of a Predictive Finite Element Model For Investigation of Phases Behavior After Cold Rolling Process

 One of the surface defects that arise in sheet metal working is when the part removes from the die. Since there are no external forces to make this defect, the origin of such fail is known as residual stress. Residual stress can develop in sheet metal forming due to non uniform deformation. In this paper, the workpiece is carbon steel with different volume fractions and arrangement of ferrite ...

Analysis of microstructure effects on edge crack of thin strip during cold rolling