Diffusion Coating of Aluminum
نویسندگان
چکیده
منابع مشابه
Titanium-Aluminum Oxide Coating on Aluminized Steel
In this study, a plasma electrolytic oxidation (PEO) process was used to form titanium-aluminum oxide coating on aluminized steel. The present work was mainly to study the effects of treatment time of PEO process on properties of the titanium coating. A potentiodynamic polarization corrosion test was employed to investigate the corrosion resistance of the coating. The friction coefficient and w...
متن کاملTrivalent Chromium Conversion Coating for Corrosion Protection of Aluminum Surface
Corrosion is the degradation or deterioration of metal components due to a reaction with the environment. Chromate conversion coating is applied to passivate metallic surface to slow down (and prevent to some extent) corrosion process. Chromate conversion process uses chromium compounds including hexavalent chromium, which is toxic, carcinogenic and hazardous to human health and environment. He...
متن کاملAcid aluminum phosphate for the binding and coating of materials
This is a review of acid aluminum phosphate for the binding and coating of materials. The acid aluminum phosphate in the form of a solution obtained by dissolving aluminum hydroxide in phosphoric acid, with a P/Al molar ratio of 23, is effective for the binding of fibrous or particulate materials. Porous ceramic articles are made using this binder by wet forming, followed by heat treatment. The...
متن کاملTransmission electron microscopy of cold sprayed 1100 aluminum coating
Cold-spraying of 1100 Al powder particles onto 1100 Al substrate was accomplished using carrier gases 100 vol.% He and a mixture of He–20 vol.% N2. TEM characterization correlates very well the occurrence of dislocations, presence of oxide, and surface instability phenomenon with observed mechanical and corrosion properties of the cold-sprayed coating. 2005 Acta Materialia Inc. Published by Els...
متن کاملCorrosion Prevention of Aluminum Nanoparticles by a Polyurethane Coating
In order to prevent corrosion, aluminum nanoparticles were coated with a polyurethane polymer. The coverage of the polyurethane polymer was controlled from 0 to 100%, which changed the corrosion rate of the nanoparticles quantitatively. The surface of the polymer coating was investigated by Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM), and the corrosion resistance of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1972
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.23.721