Dispersion Modeling of SO2 Emissions from a Lignite Fired Thermal Power Plant using CALPUFF

Modeling NOx, CO, SO2 and PM emissions from Sabzevar cement plant using SCREEN3 software

Introduction: Nowadays, the cement industry is regarded as one of the most important air pollution industries globally. This study aimed to simulate the emission of NOx, CO, SO2, and PM pollutants caused by the Sabzevar Cement Factory chimney by SCREEN3 software.  Materials and Methods: In this study, the SCREEN3 software was employed for the distribution of NOx, CO, SO2, and PM pollutants. Th...

Radionuclide emissions from a coal-fired power plant.

Current study concerns measurement of radioactivity levels in areas surrounding a 2420 MW thermal power plant fueled predominantly by bituminous coal. The concentrations of (226)Ra, (232)Th and (40)K in onsite bottom-ash were found to be 139 Bq/kg, 108 Bq/kg and 291 Bq/kg, respectively, the levels for these radiolnuclides in soil decreasing with distance from the power plant. At the plant perim...

Dispersion Modeling of Mercury Emissions from Coal-Fired Power Plants at Coshocton and Manchester, Ohio

Dispersion Modeling of Mercury Emissions from Coal-Fired Power Plants at Coshocton and Manchester, Ohio

Performance Modeling of Power Generation System of a Thermal Plant

The present paper discusses the development of a performance model of power generation system of a thermal plant for performance evaluation using Markov technique and probabilistic approach. The study covers two areas: development of a predictive model and evaluation of performance with the help of developed model. The present system of thermal plant under study consists of four subsystems with...