Distributed jet array impingement boiling on particle sintered porous surfaces
نویسندگان
چکیده
منابع مشابه
Thermal-hydraulic performance of convective boiling jet array impingement
jet impingement boiling is investigated with regard to heat transfer and pressure drop performance using a novel laser sintered 3D printed jet impingement manifold design. Water was the working fluid at atmospheric pressure with inlet subcooling of 7 o C. The convective boiling performance of the impinging jet system was investigated for a flat copper target surface for 2700≤Re≤5400. The result...
متن کاملMicrojet Impingement Boiling on a Structured-porous Surface
Using single/multiple layers of highly conductive metallic wire mesh screen bonded to a plain heat transfer base surface, the two-phase heat transfer performance of a microjet impinging onto a porous coated copper surface was studied. Experiments were conducted at three different flow rates of water under atmospheric pressure. For comparison, experiments of jet impinging on a plain copper surfa...
متن کاملEffect of Injection Parameters on Jet Array Impingement Heat Transfer
The purpose of the present study is to clarify the heat transfer characteristics with multiple jet impingement aiming at the highly efficient cooling performance. In the study, we investigated the effect of injection parameters on circular jet array impingement heat transfer. As we focus on interference among the adjacent impinging jets, tests are mainly conducted at the minimum crossflow condi...
متن کاملComparison of Area-averaged and Local Boiling Curves in Pool and Jet Impingement Boiling
Characterization of local boiling trends, in addition to the typically reported area-averaged trends, is essential for the robust design and implementation of phase change technologies to sensitive heat transfer applications such as electronics cooling. This paper compares local and area-averaged boiling curves during a phase change process using non-intrusive quantitative infrared thermal visu...
متن کاملNozzle Geometry Effects in Liquid Jet Array Impingement
The use of impinging liquid jets in electronics thermal management is attracting some consideration due to their very high heat transfer coefficients, hot spot targeting capabilities and moderate hydraulic power requirements. In this investigation an experimental study of the cooling capabilities of impinging water jet arrays is presented. Of particular interest here is the influence that the i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chinese Science Bulletin
سال: 2019
ISSN: 0023-074X
DOI: 10.1360/tb-2019-0393