Dynamic High-Temperature Tensile Characterization of an Iridium Alloy with Kolsky Tension Bar Techniques
نویسندگان
چکیده
منابع مشابه
A Modified Torsional Kolsky Bar for Investigating Dynamic Friction
-This paper introduces an experiment to investigate dry sliding resistance of frictional interfaces at normal pressures up to 100 MPa, slip speeds up to 10 m/s and slip distances of approximately 10 mm. This new apparatus involves a novel modification of the conventional torsional Kolsky bar apparatus, employed extensively in the past for investigating high strain rate behavior of engineering m...
متن کاملThermomechanical Characterization of a TiPdNi High Temperature SMA under Tension
The focus of this paper is the study of tensile work characteristics and the transformation behavior of a High Temperature Shape Memory Alloy (HTSMA) by thermomechanical characterization at temperatures ranging from 200 to 500°C. In order to investigate the above issues, a nominal composition of Ti50Pd40Ni10 HTSMA was used. The alloy was fabricated using a vacuum arc melting technique. The melt...
متن کاملA Novel Dynamic Friction Experiment Using a Modified Kolsky Bar Apparatus
-A novel dynamic friction experiment using the Kolsky bar concept was developed. The technique is complementary to the plate impact and other macroscopic friction experiments in the sense that sliding velocities and pressures not attainable otherwise can be investigated. The experimental results reported in this article show that the technique provides accurate and repeatable measurement of tim...
متن کاملSand column impact onto a Kolsky pressure bar
A laboratory-based methodology to launch cylindrical sand slugs at high velocities is developed. The methodology generates well-characterised soil ejecta without the need for detonation of an explosive; this laboratory-based tool thereby allows for the experimental investigation of the soil-structure events. The experimental set-up comprises a launcher with a cylindrical cavity and a piston to ...
متن کاملMODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Dynamic Behavior of Materials
سال: 2015
ISSN: 2199-7446,2199-7454
DOI: 10.1007/s40870-015-0022-6