Early Age of Volume Weight, Indirect Tensile Strength and Tensile Elastic Modulus of Foam Concrete Containing Blended Cement
نویسندگان
چکیده
Abstract Portland composite cement is a type of blended produced by the Indonesian factories where fly ash as one ingredient and production based on efforts to reduce CO 2 emissions in process. This research part sustainability infrastructure development which carried out through use cementitious material manufacture foam concrete. The purpose this paper was contribute understanding early age volume weight, indirect tensile strength elastic modulus hardened In study, two mix designs mortar ratio 32.53%: 67.47% 55.41%: 44.59%, were used produce test results showed good compatibility cement-superplasticizer combination with can be achieved determine concrete slurry stability thus form By using 67.47%, 1508.3 kg/m 3 , 0.83 MPa 207.5 at three days, 1476.9 0.89 254.3 7 respectively. Tensile content 44.59% days 0.37 0.46 MPa, rasio 137 200
منابع مشابه
Simulation of the Tensile Modulus and the Tensile Strength of Short Fibre Reinforced Polymers (SFRP)
This paper presents the simulation of the tensile modulus and the tensile strength of shor t glass fibre reinforced Polypropylene. Various formulae of the shear-lag theory were implemented in an analytical calculation program to evaluate the tensile strength values. Based on the homogenization approach the modulus values and the strength values, applying an existing failure criterion, were calc...
متن کاملDirect mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes
We have conducted pulling and bending tests on individual carbon nanotubes in-situ in a transition electron microscope. Based on our observation of the force required to break the tube, a tensile strength of 0.15 TPa was computed. From corresponding bending studies on such nanotubes, the Young’s modulus was estimated to be 0.9 TPa (0.8 TPa after ‘sub continuum’ corrections). These results sugge...
متن کاملA New Approach for Measurement of Tensile Strength of Concrete
Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...
متن کاملDataset of tensile strength development of concrete with manufactured sand
This article presents 755 groups splitting tensile strength tests data of concrete with manufactured sand (MSC) in different curing age ranged from 1 day to 388 days related to the research article "Experimental study on tensile strength development of concrete with manufactured sand" (Zhao et al., 2017) [1]. These data were used to evaluate the precision of the prediction formulas of tensile s...
متن کاملDetermination of Tensile Strength and Crack Growth of a Typical Polymer Concrete Using Circular Disc Samples
Cracked and un-cracked Brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (PC) material. The value of mode I fracture toughness (KIc) was determined from the center- cracked Brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked Brazilian disc specimen. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP conference series
سال: 2022
ISSN: ['1757-899X', '1757-8981']
DOI: https://doi.org/10.1088/1755-1315/1117/1/012025