Easily-accessible fullerenol as a cathode buffer layer for inverted organic photovoltaic devices
نویسندگان
چکیده
منابع مشابه
P-128: Inverted Top-Emitting Organic Light-Emitting Devices Using Vanadium Pentoxide as Anode Buffer Layer
Inverted top-emitting organic light-emitting devices (ITOLEDs) employing thin film of vanadium pentoxide (V2O5) capped with vacuum deposited semitransparent silver layer as top anode were studied. The devices consisted of C-545T doped in Alq3 as emitting layers exhibited a maximum external current efficiency of ~11cd/A and a turn on voltage of ~6.4V.We attribute the good performance of the devi...
متن کاملInverted organic photovoltaic device with a new electron transport layer
We demonstrate that there is a new solution-processed electron transport layer, lithium-doped zinc oxide (LZO), with high-performance inverted organic photovoltaic device. The device exhibits a fill factor of 68.58%, an open circuit voltage of 0.86 V, a short-circuit current density of -9.35 cm/mA2 along with 5.49% power conversion efficiency. In addition, we studied the performance of blend ra...
متن کاملEnhanced efficiency of inverted polymer solar cells by using solution-processed TiOx/CsOx cathode buffer layer
In this work, a double-buffer film of TiOx coated with CsOx (TiOx/CsOx) was solution prepared to be applied in poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:ICBA) and P3HT:[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) inverted polymer solar cells (PSCs). Compared with TiOx films and CsOx films, the TiOx/CsOx double-buffer film exhibited a favorable energy-level alignment among TiOx, CsO...
متن کاملIMPACT OF THE MORPHOLOGY OF TiO2 FILMS AS CATHODE BUFFER LAYER ON THE EFFICIENCY OF INVERTED-STRUCTURE POLYMER SOLAR CELLS
Semiconducting metal-oxide TiO2 films were deposited on FTO substrates via a sol-gel method to fabricate inverted polymer solar cells. The pore size of the TiO2 films was effectively controlled by using the sols different in stirring time. The solar cell was constructed with a fullerene derivative interlayer and a photoactive mixture of poly(3hexylthiophene) (P3HT) and phenyl-C61-butyric acid m...
متن کاملPerformance enhancement of inverted polymer solar cells with fullerene ester derivant-modified ZnO film as cathode buffer layer
In this paper, we reported that ZnO nanoparticles (NPs) film modified with C60 pyrrolidine tris-acid ethyl ester (PyC60) was used as cathode buffer layer in inverted polymer solar cells. The resultant device with a blend of PTB7:PC71BM as photoactive materials exhibited an open-circuit voltage (Voc) of 0.753 V, a short-circuit current (Jsc) of 16.04 mA cm , a fill factor (FF) of 72.5%, and an o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2014
ISSN: 2046-2069
DOI: 10.1039/c4ra03045a