Effects of Air Cavity in Dynamic Pressure Sensors: Experimental Validation
نویسندگان
چکیده
منابع مشابه
Experimental Validation of a Dynamic Model for a Mono-tube Cavity Receiver
This paper describes a dynamic model of a steam cavity receiver and presents results from simulations performed using this model in TRNSYS 16. The results are compared with experimental data to inform the calibration of specific model parameters. Using the experimental data obtained from the SG4 500 m2 dish at the ANU, it is possible to select a set of model parameters that produce good agreeme...
متن کاملFlexible Pressure Sensors: Modeling and Experimental Characterization
Flexible capacitive pressure sensors fabricated with nanocomposites were experimentally characterized and results compared with simulations from analytical modeling. Unlike traditional diaphragm silicon pressure sensors, the flexible nanocomposite sensors present a linear response over a large pressure range due to the changes in the volume of the dielectric that cause the pressure inside the d...
متن کاملExperimental validation of a topology optimized acoustic cavity.
This paper presents the experimental validation of an acoustic cavity designed using topology optimization with the goal of minimizing the sound pressure locally for monochromatic excitation. The presented results show good agreement between simulations and measurements. The effect of damping, errors in the production of the cavity, and variations in operating frequency is discussed and the imp...
متن کاملExperimental Validation of Dynamic Fragmentation Simulations
Large scale simulations using cohesive zone interfacial elements were used to understand features such as penetration and deflection of crack during the process of interaction of mode-I crack with inclined interfaces. To perform these simulations, two set of inputs are necessary. The first one is to provide valid loading boundary conditions and the second one is to incorporate accurate cohesive...
متن کاملExperimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow
The study of two-phase fluid flow behavior in hydraulic structures such as pressurized flow tunnels, culverts, sewer pipes, junctions and other similar conduits is of great importance. A two-phase mixture flowing in a pipe can exhibit several interfacial geometries such as bubbles, slugs or films, depending on the fluid and hydrodynamic properties of flow. The main variables, giving rise to a v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2020
ISSN: 1424-8220
DOI: 10.3390/s20061759