Enhanced CO2 /CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations
نویسندگان
چکیده
منابع مشابه
fabrication parameters of asymmetric mixed matrix matrimid-mil-53/pmhs membrane for co2/ch4 separation
asymmetrically mixed matrix matrimid-mil-53 membranes with silicone cover layer were fabricated. for better understanding of membrane fabrication process, three main parameters of fabrication, matrimid concentration, silicone concentration and weight percentage of metal organic framework (mil-53) particles, were optimized by an experimental design method. cross-section sem images were used to s...
متن کاملPurified and Functionalized MWCNTs: Application In CO2/CH4 Separation Using Mixed Matrix Membranes
To fabricate a defect free and high performance mixed matrix membrane (MMM), one approach is the functionalization of inorganic nanofillers (as dispersed phase) in the organic polymer matrix (as continuous phase) to modify the interactions between two phases. For this purpose,, raw multi-walled carbon nanotubes (rMWCNTs) were purified by acid mixture (HNO3/H2SO<sub...
متن کاملco2/ch4 separation via polymeric blend membrane
co2/ch4 gas separation is a very important applicatable process in upgrading the natural gas and landfil gas recovery. in this work, to investigate the membrane separation process performance, the gas permeation results andco2/ch4 separation characteristics of different prepared membranes (via blending different molecular weights of polyethylene glycol (peg) as a modifier with acrylonitrile-but...
متن کاملSynthesis and CO2/CH4 separation performance of Bio-MOF-1 membranes.
Herein we present the preparation of continuous and reproducible Bio-MOF-1 membranes supported on porous stainless steel tubes. These membranes displayed high CO(2) permeances for equimolar mixtures of CO(2) and CH(4). The observed CO(2)/CH(4) selectivities above one indicate that the separation is promoted by competitive adsorption.
متن کاملEffect of Ethylene Oxide Functional Groups in PEBA-CNT Membranes on CO2/CH4 Mixed Gas Separation
Poly (ether-block-amide) /poly (ethylene glycol)/ carbon nanotubes mixed matrix membranes have been successfully fabricated using solvent evaporation method to determine the effect of ethylene oxide groups on the performance of produced membranes. The effects of CNTs (2-8 wt%) and PEG (up to 50 wt%)were investigated in both single and mixed gas test setup in different temperature and pressure. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Science
سال: 2018
ISSN: 2198-3844
DOI: 10.1002/advs.201800982