Enhanced Removal of Antibiotic in Wastewater Using Liquid Nitrogen-Treated Carbon Material: Material Properties and Removal Mechanisms
نویسندگان
چکیده
منابع مشابه
Material Removal Mechanisms in Abrasive Flow Machining
Abrasive flow machining (AFM) is a process for the production of excellent surface qualities of inner profiles that are difficult to access and outside edges, as well as for deburring and edge rounding. The grinding medium used in AFM consists of a polymer fluid, the so-called base, in which the abrasive grains are bound. The grinding medium is pressed along the contours at a defined pressure a...
متن کاملMechanisms of Material Removal in the Cmp Process
The Chemical Mechanical Polishing (CMP) process is now widely employed in the manufacture of Ultra-Large-Scale Integrated (ULSI) circuits. Yet, the effects of various process parameters on the material removal rate (MRR) and the resulting surface topography are not well understood. In this chapter, accordingly, several polishing models are reviewed with emphasis on the mechanical aspects of CMP...
متن کاملMaterial Removal by Arc Ablation
Arc ablation holds the promise of fast, low-cost metal removal at faster rates than laser, plasma and electron-beam methods and without the tooling and fixturing forces of conventional machining. Preliminary results show surface finishes in the tens of microns range at high material removal rates (MRRs) by adaptive control of arc voltage: up to 97 mm3/sec at 4 kW. These results far exceed the c...
متن کاملEnhanced Removal of Pb+2 from Wastewater Using Combination of Ultrasound and nZVI Methods
This research reported a new method of removal of Pb+2from water by using a nano zero valent iron (nZVI) assisted ultrasonic wave. At first, nZVI was synthesized by an ultrasound assisted method. Particles morphology and surface composition were characterized by FESEM, XRD, and EDX. The XRD patterns showed that the crystallinity of the nZVI prepared using ultrasonic conditions was hi...
متن کاملThermal Aspects in Laser Material Removal
In laser material removal using a continuous wave or long-pulsed laser, the primary material removal mechanism is melting with molten metal often ejected by an assist oxygen jet. Interactions between heat transfer, oxygen diffusion and gas dynamics have been studied. In laser machining using a Q-switched solid-state laser with pulse width in the order of nanosecond, the primary material removal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Environmental Research and Public Health
سال: 2018
ISSN: 1660-4601
DOI: 10.3390/ijerph15122652