Environmental aging of epoxy based stereolithography partsPart 1 – Moisture transport
نویسندگان
چکیده
منابع مشابه
Environmental effects on mechanical properties of glass/epoxy and fiber metal laminates, Part II: Isothermal aging
The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...
متن کاملEnvironmental Effects on Mechanical Properties of Glass/Epoxy and Fiber Metal Laminates, Part I: Hygrothermal Aging
In this article, the effect of hygrothermal aging on mechanical properties of fiber metal laminates (FMLs) and E-glass/epoxy (GE) composites is investigated. First, FML and GE specimens were built using wet lay-up technique under vacuum pressure. Hygrothermal aging simulation was then carried out on both specimen types in distilled water at a constant temperature of 90 °C for 5 weeks. The resul...
متن کاملMoisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)
In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...
متن کاملA Discussion of the Molecular Mechanisms of Moisture Transport in Epoxy Resins
A typical epoxy formulation can absorb several weight percent of water, seriously degrading the physical properties of the resin. In two preceding publications (Soles, C. L.; Chang, F. T.; Bolan, B. A.; Hristov, H. A.; Gidley, D. W.; Yee, A. F. J Polym Sci Part B: Polym Phys 1998, 36, 3035; Soles, C. L.; Chang, F. T.; Gidley, D. W.; Yee, A. F. J Polym Sci Part B: Polym Phys 2000, 38, 776), the ...
متن کاملMoisture Degradation in Concrete/epoxy Systems
Combining several materials to create a structural system has led to a new kind of application previously not possible with conventional materials. Examples are FRP and its strengthening system. Nonetheless, the existence of the interface between two substrates introduces a challenging problem in determining durability of bond systems. In many applications, the durability of individual material...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Plastics, Rubber and Composites
سال: 2012
ISSN: 1465-8011,1743-2898
DOI: 10.1179/1743289811y.0000000024