Evaluation of Dynamic Fracture Toughness in a Metal-Ceramic Composite

Interfacial Fracture Toughness Measurement and Improvement for Composite/metal Interfaces

Adhesive bonding is enlarging its application range as a practical method for the joining of dissimilar materials in automotives, aircrafts, microelectronics and medical devices industries replacing conventional joining techniques such as welding, bolting and riveting [1-5]. Especially for joining of fiber-reinforced polymer (FRP) composites to other structural materials such as metal, traditio...

Fracture Toughness of Metal Castings

Marginal fracture toughness of composite resins.

The marginal fracture toughness of several types of composite resins was determined by means of the rattler test. Microparticle-filled resins showed significantly higher marginal fracture toughness than conventional composites. Posterior restorative composites were intermediate between MFRs and conventional composites. Amalgams were inferior to restorative resins. These data correspond with the...

Evaluation of in situ fracture toughness of ceramic coatings at elevated temperature by AE inverse analysis

This paper describes acoustic emission (AE) measurement at elevated temperature by laser techniques. AE signals originated from microfracture of Al2O3/SUS304 plasma sprayed coatings were detected using a laser interferometer during thermal cycling. The radii of microcracks were evaluated by the inverse analysis of AE signals. Microcrack radii were also studied by the numerical analysis based on...

Fracture of Ceramic-Polymer Composite Biomaterials

Fracture toughness, strength, and elastic modulus of poly(methyl methacrylate) (PMMA)and poly(buty1 methacrylate) (PBMA)-impregnated alumina ceramics were measured as a function of polymer volume fraction, mean polymer particle size, and interfacial bonding between the polymer and ceramic. Fracture toughness was found to increase with increasing polymer volume fraction and decreasing polymer pa...