Evolution of geometric and quality features during ultrasonic vibration-assisted continuous wave laser surface drilling
نویسندگان
چکیده
منابع مشابه
ultrasonic assisted drilling of bone
ultrasonic assisted drilling (usd) is new technique to drill difficult to machine materials. in this method, tool or workpiece vibrates with amplitude of few microns in addition to conventional drill bite rotation. in this experimental research, the bone was drilled both conventionally and using uad, then the thrust was measured in two methods at feed rates of 50, 75 and 125 mm/s and 500, 710 a...
متن کاملLaser-ultrasonic surface wave dispersion measurements on surface-treated metals.
Surface acoustic wave (SAW) velocity spectroscopy has been long considered to be one of the leading candidates for nondestructive characterization of surface-treated metals because of its ability to probe the material properties at different penetration depths depending on the inspection frequency. We developed a high-precision laser-ultrasonic technique to study the feasibility of SAW dispersi...
متن کاملImproving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method
In this paper, a new non-contact ultrasonic abrasive finishing mechanism is designed and fabricated. This mechanism combines the function of ultrasonic vibrations and the magnetic abrasive finishing (MAF) process. A permanent magnet which is mounted on a horn has been used as the processing tool. This polishing tool is vibrated at an ultrasonic frequency with piezo-electric actuators. Ultrasoni...
متن کاملUltrasonic Vibration Assisted Electro-Discharge Machining
An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...
متن کاملVibration-Assisted Femtosecond Laser Drilling with Controllable Taper Angles for AMOLED Fine Metal Mask Fabrication
This study investigates the effect of focal plane variation using vibration in a femtosecond laser hole drilling process on Invar alloy fabrication quality for the production of fine metal masks (FMMs). FMMs are used in the red, green, blue (RGB) evaporation process in Active Matrix Organic Light-Emitting Diode (AMOLED) manufacturing. The taper angle of the hole is adjusted by attaching the obj...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Processing Technology
سال: 2016
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.01.025