Exergetic Modelling of Oil-Fired Steam Boilers

Mutagenicity in emissions from coal- and oil-fired boilers.

The mutagenicity of emission samples from three oil-fired and four coal-fired boilers have been compared by using the Salmonella/microsome assay. Very little or no mutagenic activity was observed in samples from five of these boilers. The sample from one oil-fired boiler showed mutagenic activity of about 500 revertants/MJ, and the sample from a coal-fired fluidized bed combustor had an activit...

Advance Modelling and Simulation of Industrial Boilers

This paper presents some of the results of the simulation in the radiation section of an industrial boiler using an advanced mathematical model. Calculations are described for the flow, heat transfer, and chemical reaction processes occurring within a gas-fired cylindrical furnace. The calculation procedure is a two dimensional one in which the main hydrodynamic variables are the velocity and s...

Basic Water Treatment of Steam Boilers

In order to fully understand what a given boiler needs for treatment, a basic study of its supply water must be done first. Three types of impurities exist in all supplies and can cause a wide range of problems in boilers and kilns. These impurities are suspended solids, dissolved solids, and dissolved gasses. Water picks up the impurities from the ground it contacts and the air through which i...

Modelling of NOx Emissions in Natural Gas Fired Hot Water Boilers

Control of mercury emissions from coal-fired electric utility boilers.

Introduction During combustion, the mercury (Hg) in coal is volatilized and converted to elemental mercury (Hg) vapor in the high temperature regions of coal-fired boilers. As the flue gas is cooled, a series of complex reactions begin to convert Hg to ionic mercury (Hg) compounds and/or Hg compounds (Hgp) that are in a solid-phase at flue gas cleaning temperatures or Hg that is adsorbed onto t...