Experimental study of developing turbulent flow and heat transfer in ribbed convergent/divergent rectangular ducts

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Average Heat Transfer Coefficient in Rectangular Ducts with Baffle Blockages

An experimental investigation was conducted to study the average and the fully-developed heat (mass) transfer coefficients in a rectangular smooth duct and a duct with repeated-baffle blockages. The focus of attention in this work is the conventional correlation Nu / Nufd 1 + C / ( X / D ) for the average heat transfer coefficient. It was shown that for relatively short ducts, the coefficient C...

متن کامل

Turbulent Heat Transfer and Pressure Drop in an Internally Ribbed Rectangular Duct

Computational study was carried out to determine average heat transfer coefficients and friction factors for turbulent flow through rectangular ducts with ribs. A commercial finite volume package ANSYS FLUENT 12.1 is used to analyze and visualize the nature of the flow across the ribbed duct The fluid in the duct was air, and the average heat transfer coefficients were determined by measuring t...

متن کامل

Large Eddy Simulation of Turbulent Flow and Heat Transfer in a Ribbed Coolant Passage

Numerical simulations of hydrodynamic and thermally fully developed turbulent flow are presented for flow through a stationary duct with periodic array of inline transverse rib turbulators. The rib height to hydraulic diameter ratio e/Dh is 0.1 and the rib pitch to rib height ratio P/e is 10. The effect of secondary flow due to presence of rib turbulators on heat and mass transfer has been inve...

متن کامل

Effects of Rib Shapes on Heat Transfer Characteristics of Turbulent Flow of Al2O3-Water Nanofluid inside Ribbed Tubes

In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...

متن کامل

numerical simulation of viscoelastic developing flow and heat transfer in a rectangular duct

this paper presents a numerical simulation of developing flow and heat transfer of a viscoelastic fluid in a rectangular duct. in fully developed flow of a viscoelastic fluid in a non-circular duct, secondary flows normal to the flow direction are expected to enhance the rate of heat and mass transfer. on the other hand, properties such as viscosity, thermal conductivity, specific heat and rela...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Thermal Science

سال: 2015

ISSN: 0354-9836,2334-7163

DOI: 10.2298/tsci140107100k