Experimental Study of Model Refuse-Derived Fuel Pellets Swelling during Heating and Combustion
نویسندگان
چکیده
Composites of sawdust and crushed polyethylene were obtained by pressing at 5–10 atm. The resulting pellets with a size about 10–20 mm then burned in airflow muffle furnace temperature 800 °C. combustion process was recorded, video data analyzed. made it possible to estimate the change particle different stages combustion. An increase linear dimensions during conversion achieved up 2 times. Particle swelling led decrease mechanical strength destruction particles before complete burnout.
منابع مشابه
Evaluating of Refuse Derived Fuel (RDF) Production from Municipal Solid Waste (Case Study: Qazvin Province)
Considering increasing population growth in recent decades, and consequently, the increase in waste production in the world, waste management and efforts to reduce their harm to the environment has become an important issue. One of the appropriate ways to manage municipal waste is to generate energy from waste, especially by RDF production method. On the other hand, in order to reduce the consu...
متن کاملEFFECT OF FUSION REACTION PRODUCTS HEATING ON THE VOLUME IGNITION OF DT AND D3He FUEL PELLETS
Laser fusion simulations are carried out for DT and D- He pellets by using a hydrodynamic code including heating from all charged reaction products and neutrons. It is shown that the inclusion of the side reactions and heating from all reaction products in the fuel pellets have an appreciable effect on the plasma temperature, the ICF drive energy requirement, fusion gain and the ignition c...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Steam Gasification of Refuse-Derived Fuel in a Rotary Kiln Pilot Plant: Experimental Tests
Steam Gasification of Refuse-Derived Fuel in a Rotary Kiln Pilot Plant: Experimental Tests Antonio Molino*, Pierpaolo Iovane, Antonio Donatelli, Giacobbe Braccio, Simeone Chianese, Dino Musmarra ENEA Italian National Agency for New Technologies, Energy and Sustainable Economic Development, SS 106 Jonica, km 419.500, 75026 Rotondella (MT), Italy Seconda Università degli Studi di Napoli, Dipartim...
متن کاملeffect of fusion reaction products heating on the volume ignition of dt and d3he fuel pellets
laser fusion simulations are carried out for dt and d- he pellets by using a hydrodynamic code including heating from all charged reaction products and neutrons. it is shown that the inclusion of the side reactions and heating from all reaction products in the fuel pellets have an appreciable effect on the plasma temperature, the icf drive energy requirement, fusion gain and the ignition condit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2023
ISSN: ['2227-9717']
DOI: https://doi.org/10.3390/pr11040995