Experimental Study of the Aspheric-plano Lens Fabrication using Compression Glass Molding
نویسندگان
چکیده
منابع مشابه
Aspheric glass lens modeling and machining
The incorporation of aspheric lenses in complex lens system can provide significant image quality improvement, reduction of the number of lens elements, smaller size, and lower weight. Recently, it has become practical to manufacture aspheric glass lenses using diamond-grinding methods. The evolution of the manufacturing technology is discussed for a specific aspheric glass lens. When a prototy...
متن کاملCompression Molding of Refractive and Diffractive Hybrid Glass Lenses
INTRODUCTION Refractive and diffractive hybrid lenses have been designed and implemented for some industrial applications. These optical elements however are limited to low volume production or specific materials such as polymers. Although plastic lenses can be fabricated using injection molding into different geometries at high volume, these optics do not perform well under rigorous conditions...
متن کاملA Collaborative Research in Experimental Study and Numerical Simulation of Compression Molding of Precision Glass Optical Elements
Compression molding process can potentially be used to make high precision glass lenses. In a lens molding process, glass raw material is heated above its transition temperature and is subsequently pressed between the two mold halves into a lens shape. Controlled cooling (annealing) of the formed lens is then carried out with the molds in a closed position in order to enable uniform cooling of ...
متن کاملDesign and fabrication of low-cost thermal imaging optics using precision chalcogenide glass molding
Aspheric and diffractive surfaces in infrared materials are traditionally fabricated by single point diamond turning, which is a high-cost, low-throughput process, not suitable for low-cost, high-volume applications. Precision molding of chalcogenide glasses is a novel process we developed to allow the efficient fabrication of quality infrared optics in large volumes. In this paper we present t...
متن کاملExperimental Study on the Effects of Compression Parameters on Molding Quality of Dried Fish Floss
Taking the molding block thickness, relaxation ratio and shatter resistance as evaluation indicators, the effects of compression parameters, which include mold form, compressive force, pressure-holding time and loading rate, on molding block quality of fish floss were investigated by means of single factor and orthogonal test. The results show that: 1) the mold form, compressive force, pressure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions on Electrical and Electronic Materials
سال: 2008
ISSN: 1229-7607
DOI: 10.4313/teem.2008.9.6.237