EXPERIMENTAL STUDY ON LATERAL-TORSIONAL BUCKLING OF TRUSS BEAM-COLUMNS WITH RECTANGULAR TUBE CHORDS
نویسندگان
چکیده
منابع مشابه
The effect of discrete lateral and torsional bracings stiffness on the elastic lateral-torsional buckling of mono-symmetric I beam, under the concentrated moment
When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...
متن کاملLateral-torsional buckling resistance of cold-formed high strength steel rectangular hollow beams
Hollow sections have been widely used for steel structures. Applications of High Strength Steel (HSS) on cold-formed hollow sections lead to thinner and lighter structures. This paper presents numerical investigations on the lateral-torsional buckling resistance of the cold-formed high strength steel rectangular hollow beam. Results from finite element analysis using Abaqus software are compare...
متن کاملAn Experimental Study on Seismic Performance of Steel Truss Coupling Beams with Buckling-restrained Brace
Through the pseudo-static test on the steel truss coupling beams with buckling-restrained brace, the bearing capacity, deformation capacity, hysteresis curve, skeleton curve, ductility, Energy Dissipation and stiffness degradation of such coupling beam are understood. The test results show that the steel truss coupling beams with buckling-restrained brace is characterized by bigger bearing capa...
متن کاملNumerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upp...
متن کاملDetermination of Buckling Loads from Triaxial Load Tests of Slender Concrete-filled Tube Beam-columns
This paper briefly describes efforts at determining buckling loads of slender concrete-filled tube beam-columns. Although utilizing state-of-the-art equipment and controllers, unexpected difficulties were encountered on extracting buckling loads for the specimens due to (a) frictional forces in the actuators, (b) large initial bidirectional imperfections, (c) initial stresses due to constructio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 1986
ISSN: 0910-8025,2433-0000
DOI: 10.3130/aijsx.369.0_23