Extrudate Characteristics Produced from High Density Screw-Type Extruder Machine

Continuous Granulation with a Twin-Screw Extruder

Wet granulation in a twin-screw extruder: implications of screw design.

Wet granulation in twin-screw extrusion machinery is an attractive technology for the continuous processing of pharmaceuticals. The performance of this machinery is integrally tied to its screw design yet little fundamental knowledge exists in this emerging field for granulation to intelligently create, troubleshoot, and scale-up such processes. This study endeavored to systematically examine t...

Aqueous extraction of residual oil from sunflower press cake using a twin-screw extruder: Feasibility study

The objective of this study was to evaluate the feasibility of an aqueous process to extract the residual oil from sunflower press cakes using a co-rotating twin-screw extruder. Two different configurations were tested: the expression fromwhole seeds followed by the aqueous extraction, in two successive apparatus or in the same one. For the aqueous extraction stage, the oil yield depended on th...

Effect of Extruder Screw Speed, Temperature, and Enzyme Levels on Sugar Recovery from Different Biomasses

Biofuels from biomass have the potential to reduce the dependency on fossil fuels. An efficient pretreatment method is required to accomplish the target of the Energy Act 2005. Extrusion could be a viable continuous pretreatment method to be explored. The objectives of the current study were to investigate the influence of screw speed and barrel temperature on sugar recovery from the selected w...

Modeling of Transport Phenomena and Melting Kinetics of Starch in a Co-Rotating Twin-Screw Extruder

A mathematical model was developed to simulate fluid flow, heat transfer, and melting kinetics of starch in a co-rotating intermeshing twin-screw extruder (TSE). The partial differential equations governing the transport phenomena of the biomaterial in the extruder were solved by a finite element scheme. For validating the model, the predicted product pressure, bulk temperature at the entrance ...