Fabrication of an Anode Supported Tubular SOFC System
نویسندگان
چکیده
منابع مشابه
Structure Formation in Anode and Its Effect on the Performance of Micro-Tubular SOFC: A Brief Review
Anode-supported micro-tubular solid oxide fuel cell (SOFC) offers many advantages over the electrolyte and cathode-supported confgurations in terms of simplicity, reliability, and efciency. In such design, the anode substrates should possess a highly porous structure, provide active sites reaction as well as serving good mechanical strength. This structure is desired to ...
متن کاملHigh performance anode-supported tubular solid oxide fuel cells fabricated by a novel slurry-casting method
Tubular solid oxide fuel cells were fabricated and evaluated for their microstructure and electrochemical performance. The tubular substrate was prepared by casting NiO-Y2O3 stabilized ZrO2 (YSZ) slurry on the inner wall of a plastic mold (tube). The wall thickness and uniformity were controlled by slurry viscosity and rotation speed of the tube. The cells consisted of Ni-YSZ functional anode, ...
متن کاملAn Examination of SOFC Anode Functional Layers Based on Ceria in YSZ
The properties of solid oxide fuel cell (SOFC) anode functional layers prepared by impregnation of ceria and catalytic metals into porous yttria-stabilized zirconia (YSZ) have been examined for operation at 973 K. By varying the thickness of the functional layer, the conductivity of the ceria-YSZ composite was determined to be only 0.015–0.02 S/cm. The initial performance of anodes made with ce...
متن کاملNumerical Study of Heterogeneous Reactions in an SOFC Anode with Oxygen Addition
Previous experimental studies have shown that addition of small amounts of oxygen to a hydrocarbon fuel stream can control coking in the anode, while relatively large amounts of oxygen are present in the fuel stream in single-chamber solid oxide fuel cells SOFCs . In order to rationally design an anode for such use, it is important to understand the coupled catalytic oxidation/ reforming chemis...
متن کاملThermoelectric Model of a Tubular SOFC for Dynamic Simulation
A one-dimensional transient model of a tubular solid oxide fuel cell stack is proposed in this paper. The model developed in the virtual test bed (VTB) computational environment is capable of dynamic system simulation. This model is based on the electrochemical and thermal modeling, accounting for the voltage losses and temperature dynamics. The single cell is discretized using a finite volume ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 2005
ISSN: 0161-6374,2576-1579
DOI: 10.1149/200507.0384pv