Fabrication of highly stable silica coated ZnCuInS nanocrystals monolayer via layer by layer deposition for LED application
نویسندگان
چکیده
منابع مشابه
A facile layer-by-layer deposition process for the fabrication of highly transparent superhydrophobic coatings.
A facile layer-by-layer deposition process is developed to fabricate highly-transparent superhydrophobic coatings, which comprise the underlying antireflective nanoporous silica layer and the top transparent superhydrophobic SiO(2) nanoparticle layer.
متن کاملHighly stable and reversible lithium storage in SnO2 nanowires surface coated with a uniform hollow shell by atomic layer deposition.
SnO2 nanowires directly grown on flexible substrates can be a good electrode for a lithium ion battery. However, Sn-based (metal Sn or SnO2) anode materials always suffer from poor stability due to a large volume expansion during cycling. In this work, we utilize atomic layer deposition (ALD) to surface engineer SnO2 nanowires, resulting in a new type of hollowed SnO2-in-TiO2 wire-in-tube nanos...
متن کاملHighly stable surface functionalization of microgas chromatography columns using layer-by-layer self-assembly of silica nanoparticles.
A controllable and high-yield surface functionalization of silicon microchannels using layer-by-layer (LbL) self-assembly of SiO2 nanoparticles (SNPs) is presented. The application of SNPs (45 nm average diameter) coating as a stationary phase for chromatographic separation is also demonstrated with surface functionalization using chloroalkylsilanes. This method facilitates a simple, low-cost, ...
متن کاملStable single-layer honeycomblike structure of silica.
Silica or SiO(2), the main constituent of Earth's rocks has several 3D complex crystalline and amorphous phases, but it does not have a graphitelike layered structure in 3D. Our theoretical analysis and numerical calculations from the first principles predict a single-layer honeycomblike allotrope, hα silica, which can be viewed to be derived from the oxidation of silicene and it has intriguing...
متن کاملFabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering
In this study, using biodegradable polymers, nanofiberouse scaffolds were fabricated from the layer-by-layer electrospinning method, including two layer that poly (ε-caprolactone), polyvinylpyrrolidone deposited at first layer and poly (ε-caprolactone), polyvinyl alcohol , β-tricalcium phosphate at latter. After prepration of scaffolds, scanning electron microscopy (SEM), swelling, porosity, me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2014
ISSN: 1094-4087
DOI: 10.1364/oe.22.002483