FAILURE CRITERIA FOR GEOMATERIALS IN SIMPLE DISCRETE ELEMENT MODELING
نویسندگان
چکیده
منابع مشابه
Discrete Element Modeling of Dynamic Compaction with Different Tamping Condition
Dynamic Compaction (DC) is a common deep compaction method that is usually used for densification of coarse-grained soils. Although traditional continuum-based models such as the Finite Element Method can be successfully applied for assessment of stress distributions or deformations induced by DC, they are typically not adequate for capturing the grain scale mechanisms of soil behavior under im...
متن کاملA 3D Discrete Element Analysis of Failure Mechanism of Shallow Foundations in Rocks
In this research work, a 3D numerical modeling technique is proposed based on the 3D particle flow code in order to investigate the failure mechanism of rock foundations. Two series of footings with different geometries and areas are considered in this work. The failure mechanism obtained is similar to that of the Terzaghi’s but there is a negligible difference in between. Lastly, one equation ...
متن کاملDiscrete element modeling of explosion-induced fracture extension in jointed rock masses
The explosion process of explosives in a borehole applies a very high pressure on its surrounding rock media. This process can initiate and propagate rock fractures, and finally, may result in the rock fragmentation. Rock fragmentation is mainly caused by the propagation of inherent pre-existing fractures of the rock mass and also from the extension of the newly formed cracks within the intact ...
متن کاملmodeling of different subsoiler tines performance using discrete element method
for designing tillage implements it would be better to estimate soil forces exerted to the implements. many researches showed that numerical method of discrete element method (dem) is the cheapest and fastest technique for modeling granular material such as soil and especially sandy soil. in this study, paraplow and bentleg tines performance was compared with conventional tine using experimenta...
متن کاملDiscrete Element Modeling of Dike-induced Deformation
Introduction: The Tharsis region of Mars is characterized by large volcanic and tectonic centers with distinct sets of graben systems. Many of the radially oriented grabens have been inferred to form in response to intrusion of magmatic dikes. This interpretation is based primarily upon early physical and numerical (boundary element) models that were developed originally to understand surface d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM))
سال: 2011
ISSN: 2185-4661
DOI: 10.2208/jscejam.67.105