Fatigue Strength of Medium Steel under Many-Fold Multiple Load in Three Stress Levels

Effect of Mean Stress on Low-Cycle Fatigue Strength of a Medium Carbon Steel S45C - True Stress-Controlled Cycling- by

Effect of Mean Stress on Low-Cycle Fatigue Strength of a Medium Carbon Steel S45C True Stress-Controlled Cyclingby Tatsuo ENDO*, Shoji HARADA*, Yoshihiro FUKUSHIMA* and Haruo SAKAMOTO** Nominal stress-controlled low-cycle fatigue life under imposed mean stress is affected by elongation or contraction due to cyclic stress-induced creep. Therefore, the effect of mean stress was examined by a micr...

Numerical and Experimental Evaluation of Residual Stress and Fatigue Strength of Steel CK35 in Shot Peening Process

In shot peening process the work piece surface is struck by a large number of balls and compressive residual stress is generated on the surface. So, mechanical properties such as fatigue strength, stress corrosion resistance, smooth shape and ... will improve. In this paper, the balls with a speed of 100 to 200 m/s were struck on the steel samples and fatigue strength compared with specimens wi...

Eects of Magnetic Field and Inclined Load in Micropolar Thermoelastic Medium Possessing Cubic Symmetry under Three Theories

Fatigue strength evaluation of self-piercing riveted cold rolled steel joints under mixed mode loading conditions

Fatigue strength of cross-shaped specimens of SPR joints made of SPCC was evaluated at load angles of 0°, 45°, and 90°. For the static strength at load angles of 0°, 45°, and 90°, the maximum loads were determined to be 4890N, 1969N, and 1611N, respectively. Regarding for the relationship between the load amplitude and the number of cycles (Nf), the results were 014 . 0 3 . 2209 − = f amp N P ,...

Fatigue Properties of the Ultra-High Strength Steel TM210A

This paper presents the results of an experiment to investigate the high cycle fatigue properties of the ultra-high strength steel TM210A. A constant amplitude rotating bending fatigue experiment was performed at room temperature at stress ratio R = -1. In order to evaluate the notch effect, the fatigue experiment was carried out upon two sets of specimens, smooth and notched, respectively. In ...